Auto-Sub settings question...

mnsportsguy40 · 10-13-2009, 01:41 PM

Can someone please tell me how these really work? Especially for the teams that use the 2 runningback system. I've seen posted anywhere from 25in-30out to 79in-80out but I have yet to find the answer for the balance of the real subtitute system unless you do it manually every play and every formation. I am also under the understanding that the fatigue slider has something to do with a player being subbed for...or am I wrong. If anyone can shed some light on the whole auto-sub/fatigue(if that matters) system please share it with me and anyone else that is having the same frustrations....

major major · 10-13-2009, 02:04 PM

I use these auto sub settings and get realistic spells with my fatigue @ 54.

maddenbeast2010
Rookie

OVR: 2
Join Date: Oct 2009
Posts: 10

Juz a new up dated from last one tha best yet

Ok y'all up dated tha best yet I read some posts that helped out on these skills for CPU/PLAYER.... This article
By: Ian Cummings really helped to I sat down and look at tha game and tryed my best... Plus these post helped even better so send me feedback and post stats let me know how y'all like them

15MIN*
25 RUNOFF
GAMESPEED:Slow
SPD THERESHOLD:45

INJ:56
FATIGUE:59

PENALTIES
EVERYTHING ON 100 BUT
HOLDING:49
FACEMASK:71(IF YA TEAM AGGRESTIVE IT WILL GET CALLED ALOT)
CLLIPPING:85

PS/CPU
PASSING:
QB ACCURACY-11/41
PASS BLOCKING-21/7
WR CATCHING-37/49

RUSHING:
BROKEN TAKLE-7/0
RUN BLOCKING-30/100
FUMBLES-45/57

PASS DEFENSE:
REACTION TIME-1/59*
INTERCEPTION-0/0
PASS RUSHING-80/76

RUSH DEFENSE:
REACTION TIME-3/0
BLOCK SHEDDING-0/0
TACKLING-30/35

Special teams
FG
60/75
Punt
73/70
Kickoff
45

Sub
QB: 55/80
RB: 83/84
WR: 82/83
FB/TE: 75/80
OL: 60/80

DT: 84/85
DE: 83/84
LB: 65/80
CB: 60/80
S: 60/80

KingV2k3 · 10-13-2009, 04:56 PM

I'm going to give this a shot:

Sub/injury sliders?

KBLover · 10-13-2009, 05:43 PM

Quote:

Originally Posted by mnsportsguy40


	Can someone please tell me how these really work? Especially for the teams that use the 2 runningback system. I've seen posted anywhere from 25in-30out to 79in-80out but I have yet to find the answer for the balance of the real subtitute system unless you do it manually every play and every formation. I am also under the understanding that the fatigue slider has something to do with a player being subbed for...or am I wrong. If anyone can shed some light on the whole auto-sub/fatigue(if that matters) system please share it with me and anyone else that is having the same frustrations....

Wish I could help

I'm still trying to find one that limits HB to about 20 carries unless they have like 95 STA without them totally disappearing in the 4th quarter (i.e out but never can come back in).

bigman24 · 10-14-2009, 02:37 AM

totally disappearing in the 4th quarter (i.e out but never can come back in).

This happens to you as well KB, at least i know im not the only one

major major · 10-14-2009, 04:18 AM

Quote:

Originally Posted by bigman24


	totally disappearing in the 4th quarter (i.e out but never can come back in). This happens to you as well KB, at least i know im not the only one

was also happening to me before I used this slider auto-sub set and fatigue. played 4 full games and no RB disappearing acts!

Lukin4 · 10-14-2009, 05:06 AM

Quote:

Originally Posted by major major


	was also happening to me before I used this slider auto-sub set and fatigue. played 4 full games and no RB disappearing acts!

Yep, you just need to play with the fatigue and sub in numbers.... i'm using 75 fatigue, and 80/85 sub out/in settings.... works great! 15min qtrs / 25 sec runoff btw...

Howie75 · 10-14-2009, 05:47 AM

I'm assuming that raising fatigue to 75 makes the players fatigue faster?

Lukin4 · 10-14-2009, 06:29 AM

Quote:

Originally Posted by Howie75


	I'm assuming that raising fatigue to 75 makes the players fatigue faster?

sure does... you need to figure out the right setting for yourself though, as it depends also on sub in/out and quarter length settings as to how much impact it has late in the 4th quarter of games like it should

Howie75 · 10-14-2009, 07:42 AM

Quote:

Originally Posted by Lukin4


	sure does... you need to figure out the right setting for yourself though, as it depends also on sub in/out and quarter length settings as to how much impact it has late in the 4th quarter of games like it should

yea..I think I am at default playing 15 min quarters and my ol is totally gassed if I put together a prolonged drive (say like 10 plays, 6 min)

Also I have noticed my MLB wears down over a long drive as well. I would think at a higher setting I would be in real trouble.

10-13-2009, 01:41 PM	#1 (permalink)
mnsportsguy40 Rookie OVR: 1 Join Date: Nov 2007 Posts: 25	Auto-Sub settings question... Can someone please tell me how these really work? Especially for the teams that use the 2 runningback system. I've seen posted anywhere from 25in-30out to 79in-80out but I have yet to find the answer for the balance of the real subtitute system unless you do it manually every play and every formation. I am also under the understanding that the fatigue slider has something to do with a player being subbed for...or am I wrong. If anyone can shed some light on the whole auto-sub/fatigue(if that matters) system please share it with me and anyone else that is having the same frustrations....

10-13-2009, 04:56 PM	#3 (permalink)
KingV2k3 Pro OVR: 12 Join Date: May 2003 Posts: 1,176	Re: Auto-Sub settings question... I'm going to give this a shot: Sub/injury sliders?

10-14-2009, 02:37 AM	#5 (permalink)
bigman24 Rookie OVR: 2 Join Date: Dec 2003 Posts: 121	Re: Auto-Sub settings question... totally disappearing in the 4th quarter (i.e out but never can come back in). This happens to you as well KB, at least i know im not the only one

10-14-2009, 05:47 AM	#8 (permalink)
Howie75 Commitment to Excellence OVR: 11 Join Date: Jul 2002 Posts: 1,605	Re: Auto-Sub settings question... I'm assuming that raising fatigue to 75 makes the players fatigue faster?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode