Originally Posted by Maynard:
try this from NZ Buccaneer

360 - IF YOU CAN'T DRAG AND DROP FILES IN XPORT 1.07

I ran into this problem for the first time last night - very simple to workaround for me: go up a level (to the folder as opposed to the file level) and drag this entire folder to your desktop; check if the file needs renaming (e.g. fro *.ROSS TO *.ROS) and rename if necessary; open Xport with your HDD and drag the file across.

If this method doesn't work try going up to higher levels, or drag directly from Xport window to Xport window (have two instances running).

Originally Posted by Maynard:
i had trouble with the instructions in the first post......i was able to transfer everything like they said, but when i went into the game my save was not there.......alot of trial and error later i located this thread with the following post


i bolded the steps that were different in case anyone else has the same problem i had (note, this wont solve the drag issue with vista which btw wouldnt work for me either, lucky i have another pc with XP)


Using the Xsata to Transfer Roster/Franchise Files to the 360

Originally Posted by cedwebb:
So is this method using Vista or XP? Has anyone using Vista had any success transfering the rosters?

Originally Posted by :
I had the same problem using Vista. Worked on this problem for a whole weekend . You have to insert the file by right clicking with your mouse. Can't use the software issued with Xport . You have to use the 360 explorerer that can be downloaded from i believe gamesaves.com. If this isn't the right sight it can be found on many of the post on this sight. All this said and done... you might have to insert the files one at a time because when I tried to insert all four files at once they would stop at a certain point. Found this out after trial n error. And last but not least make sure you unszipp all files. I used winrar. If this doesn't work (last resort ) use a system that runs Windows XP... used it at work with now problems what soever. It recognized the hard drive and the memmory card module right off the bat using Xport softeware and was able to drag and drop. Hope this work for ya'll I would hate for anyone to go back to playin Madden because they can't get this file to load. Good luck

Originally Posted by chaseutley:
Ok so I was able to transfer rosters using Vista. Follow the steps mentioned by the guy in this thread: Cant drag and drop franchise file into Xport

You need to use Xplorer360, not Xport. Drag and drop won't work, you have to the use the menu options built into the program. Add a new folder in the correct spot (just follow the guide in the first post of this topic) and rename it the same as the folder of the roster you are trying to transfer. To rename a folder, double click the title of the folder (the text part, not the icon part) and then you can edit the name. Then insert the correct files into the folder and you should be all set. I am using Vista Home Premium 64-bit in case anyone was wondering. You need to Run as Administrator when opening the program. To do this, right click and select Run as Administrator. From what I can tell, the program wont detect your hard drive unless you do this.

Originally Posted by cedwebb:
I am freaking out!

Here is what is going on now with this whole deal..

I think everyone knows I am using Vista. So I am using xplorer360 to try to transfer the roster files. I have my roster downloaded and I have deleted the datel.info file like some have suggested. I open my xplorer and go to udata, it shows the folder starting with the 5....# which is the 2k5 save. Now inside that folder is the 19FA1AF775EF folder with the EXTRA, SAVEGAME.DAT etc..So in explorer I get the 5....# folder so show up in the right panel. I right click on that and hit insert. Go to the file that is saved on my desktop that is the same numberd folder and it actually inserts into the right panel. That should be it right? Nope..so I turn on my 360 and when the game pops up and says to hit start it just freezes there. Then I go into my HDD without the game in the system and erase the saved file for 2k5 and now I can get back into the game. I go into rosters and make a save to try again. This time in xplorer I click on the 5...# folder so it shows the 19F....folder in the right panel. I hit insert and go to that same folder on my desktop and in starts in inject into that folder in xplorer. That should be it right? Nope..try to start my game and when I hit start it freezes. So I am getting the transfer so it seems but it is just freezing my game. Anyone run into this? I know I am hopeless but I am determined to figure this out. Thanks! :-)

Originally Posted by johnnyg713:
SAVE THE 19FA1AF775EF SUB FOLDER INSIDE THE 53450030 TO YOUR DESKTOP AND TRANSFER IT TO THE HDD

insert 19FA1AF775EF folder into the right side of the gamesave 5... folder on the xplorer...
so when you are going through the hdd in the xplorer software you will do all the xbox1 compatible>udata... to the 5...# which is the 2k5 gamesave... you are going to insert the 19FA1AF775EF into that...
I HAD THE FREEZING PROBLEM AS WELL BC I DID THE EXACT SAME THINGS YOU JUST MENTIONED BUT WHAT I JUST TOLD YOU SHOULD WORK...

There are 2 folders that you download when you download a roster... the xbox1 folder and the actual save folder... WORRY ABOUT THE 19FA1AF775EF SUB FOLDER INSIDE THE 53450030 FOLDER, NOT THE ACTUAL WHOLE FOLDER ITSELF. THE 19FA1AF775EF FOLDER IS WHAT YOU NEED.
NOW BC YOU HAVE A 360 YOU DO NOT NEED TO COPY OVER THE XBOX1 FOLDER TO THE HDD. THAT IS WHY IN MY DIRECTIONS I TELL YOU TO OPEN THAT AND GET THE 19FA1AF775EF FOLDER WHICH IS THE ACTUAL SAVE. 360 USERS ONLY NEED TO WORRY ABOUT THAT FOLDER WHEN DOWNLOADING A ROSTER FILE... NOT THE 53450030 FOLDER.
THAT SHOULD DO IT

LinkBack

LinkBack URL

About LinkBacks